ENCISOLV-LDC

Introduction

Encisolve liquid Alkaline Dairy Detergent specifically formulated for the removal of fats and protein deposits in drinking plants.

Active Ingredients

Sodium Hydroxide : 10—60%

Sodium  Hypochlorite :   1-10%

Directions for Use

Plant:

Compliance requires all milk contact surface to be rinsed with a minimum of 5 litres of compliant water per set of cups before milking. Hot water discharge temperatures must be greater  than 55C

Dilute Encisolv at the rate of 2 ml litre of hot water using the wash volumes:

Jetter / Bucket wash -10L os wash solution per set of cups

Reverse flow -20L of wash solution per set of cups

Rinse plant thoroughly with cold water using the above wash volumes.

Bulk Milk Tank:

Compliance requires all milk contact surfaces to be rinsed with a minimum of 120 litres of compliant water before milking. Hot water discharge temperature must be greater than 55C. The maximum water temperature for vet cleaning should be 82C to avoid damage to the cooling pad.

Dilute Encisolv at the rate of 2 ml per litre of hot water based on the wash volume as seen below. Recycle for 3 min.Rinse with cold water. Drain bulk milk plant